Ultra Hobby Products
Your Subtitle text
RC and CL Accessories
CNC cut Leadout Guide: CNC cut from 1/8 ply, this leadout guide is designed to be used with our line of CL Sport/Stunt/WWII Combat foam wing planes. Simply cut a slot in the wing of your plane and epoxy the leadout guide into place, then run the eyelets of your lines through the slots to adjust your leadout position. Can be cut into smaller pieces for Combat planes. $3.00
Carbon Fiber Pushrods. Central Hobbies CF pushrods are made from longitudinal carbon fiber for high strength and light weight. Combine with the Ultra clevis and Titanium rod ends for a virtually indestructible control system. We recommend using 24 hr. J-B Weld to assemble. Available in 2 sizes.
1. 5/32 x 24 rods (2) and Ti 4-40 ends (4)............................$16.00
2. 3/16 x 36 rods (2) and Ti 4-40 ends (4)............................$17.00
3. 5/32 x 24 rods (2)........$9.00
4. 3/16 x 36 rods (2)........$10.00
5. 5/32 x 4-40 ends (4)....$9.00
6. 3/16 x 4-40 ends (4)....$9.00
Bullet Wheel Collars. Made from high quality aluminum. Available in three sizes for 1/8", 5/32", and 3/16" axles. Please specify size required when ordering.............$4.00/pair
UHP 'Moon' Style Motor Mount Pads. These motor mounts are made from high quality aluminum and measure 3/16" x 3/8" x 2". These can be drilled and tapped and used as interchangeable motor mounts, or you can simply mount your motor through the pads.....................$4.00/pair
Finished Tom Morris Handle.These handles are made from the Morris handle kit and come already assembled, sanded and finished with Polyurethane for protection and durability. Available in two styles: Bias grip (shown) or Straight grip
....................................$18.00
Ultra Hobby Products Ultra Clevis.Our first product, the Ultra clevis offers near infinite adjustability to your control system while being lightweight and incredibly strong. Tested to over 400 lbs. the Ultra clevis has never been known to fail. The Ultra clevis is made of high quality aluminum and comes in three sizes.
1. Wide Throat...................$8.00
2. Narrow Throat...............$8.00
UHP 'Pat Johnston' Manifold/Venturi. Designed by Pat Johnston this manifold/venturi setup allows for easy conversion of RC 4 stroke motors to CL use. The UHP manifold/venturi conversion has been tested and proven at the top levels of CLPA competition.
Each set comes with a manifold, 3 venturis (except Saito 40, 1 venturi), OS needle valve assembly, and mounting screws. The UHP is available for the following motors:
Saito .40..........................$75.00
Saito .56..........................$65.00
Saito .62..........................$65.00
Saito .72..........................$65.00
Saito .82..........................$65.00
OS 52 FS..........................$65.00
OS 56 FS-A......................$65.00
Thunder Tiger .54...........$65.00
Carbon Fiber Pushrods. Central Hobbies CF pushrods are made from longitudinal carbon fiber for high strength and light weight. Combine with the Ultra clevis and Titanium rod ends for a virtually indestructible control system. We recommend using 24 hr. J-B Weld to assemble. Available in 2 sizes.
1. 5/32 x 24 rods (2) and Ti 4-40 ends (4)............................$16.00
2. 3/16 x 36 rods (2) and Ti 4-40 ends (4)............................$17.00
3. 5/32 x 24 rods (2)........$9.00
4. 3/16 x 36 rods (2)........$10.00
5. 5/32 x 4-40 ends (4)....$9.00
6. 3/16 x 4-40 ends (4)....$9.00
Bullet Wheel Collars. Made from high quality aluminum. Available in three sizes for 1/8", 5/32", and 3/16" axles. Please specify size required when ordering.............$4.00/pair
UHP 'Moon' Style Motor Mount Pads. These motor mounts are made from high quality aluminum and measure 3/16" x 3/8" x 2". These can be drilled and tapped and used as interchangeable motor mounts, or you can simply mount your motor through the pads.....................$4.00/pair
Finished Tom Morris Handle.These handles are made from the Morris handle kit and come already assembled, sanded and finished with Polyurethane for protection and durability. Available in two styles: Bias grip (shown) or Straight grip
....................................$18.00
Ultra Hobby Products Ultra Clevis.Our first product, the Ultra clevis offers near infinite adjustability to your control system while being lightweight and incredibly strong. Tested to over 400 lbs. the Ultra clevis has never been known to fail. The Ultra clevis is made of high quality aluminum and comes in three sizes.
1. Wide Throat...................$8.00
2. Narrow Throat...............$8.00
UHP 'Pat Johnston' Manifold/Venturi. Designed by Pat Johnston this manifold/venturi setup allows for easy conversion of RC 4 stroke motors to CL use. The UHP manifold/venturi conversion has been tested and proven at the top levels of CLPA competition.
Each set comes with a manifold, 3 venturis (except Saito 40, 1 venturi), OS needle valve assembly, and mounting screws. The UHP is available for the following motors:
Saito .40..........................$75.00
Saito .56..........................$65.00
Saito .62..........................$65.00
Saito .72..........................$65.00
Saito .82..........................$65.00
OS 52 FS..........................$65.00
OS 56 FS-A......................$65.00
Thunder Tiger .54...........$65.00
Sales and General information: Ultrahobby@cs.com
Phone: (214)403-5224 or (214)826-3041
Ultra Hobby Products
9930 Edgecliff Cir.
Dallas, TX 75238
USA
UHP accepts PayPal payments at: Ultrahobby@cs.com
Phone: (214)403-5224 or (214)826-3041
Ultra Hobby Products
9930 Edgecliff Cir.
Dallas, TX 75238
USA
UHP accepts PayPal payments at: Ultrahobby@cs.com
